You can bypass your factory cooler if you wanted to, but typically people use our coolers like the popular # D13503 as a supplemental cooler installed downstream of the factory cooler.
To bypass yours though would only require you to run the lines of your factory cooler to the # D13503 instead. view full answer...
The only way to get the correct replacement mounting hardware for your 2007 Chevy Silverado Classic is to know the part number of the Westin grille guard you have on your truck, as you can't mix and match different guards and hardware, as they won't fit. There are a number of different options for Westin Sportsman grille guards depending on the model of your Chevy:
A 2007 Chevy Silverado Classic 1500 LD has Westin Sportsman Grille Guard - Black # 40-1175 or Polished Stainless Steel 45-1170.... view full answer...
The K-Source Snap & Zap Custom Towing Mirrors like part # KS80900 for example are unfortunately only sold in pairs. However, if you have damaged one of them then we do offer replacement glass if that is the part that was damaged therefore you won't have to get a new pair if just the glass was damaged. The Replacement Glass for K-Source Snap & Zap Custom Towing Mirror part # KS80901GRH for passenger side or part # KS80902GLH for driver side. view full answer...
Thanks for reaching out!
It looks like you have the Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-JRC0303 on your short bed 2007 Chevy Silverado Classic which means you need the Replacement Tarp # PE22KV. view full answer...
For your 2007 Chevy Silverado 1500 Classic with 6-1/2 foot bed, the Replacement Cover for Extang Tuff Tonno Snapless J-Strip, Soft Roll-up Tonneau Cover - Black # EX13940 is what you are looking for. view full answer...
We have some replacement parts for the Firestone Ride Rite kit part # F2250. We have the following:
Replacement Bail Clamp # F3373
Replacement Bracket Clamp # F0530
Air Line Service Kit # F2012
Air Spring part # F6781
Lower Bracket # F5541
Upper Bracket # F5766
Hardware Kit part # FA21-760-2250
Since you said hardware kit most likely you are referring to the # FA21-760-2250 but I wanted to mention everything in case you needed additional components. view full answer...
The only parts that are replaceable for the Solera Classic Awnings are the gas struts and the support arms per my contact at Lippert. If you need something other than either of those parts then you'll need to replace the entire awning arm.
Attached are links to our selections of replacement arms and struts for you to check out. If you'll be swapping out the arms make sure you choose replacements that are the same length as your current awning arms. view full answer...
The direct replacement for your Dutton-Lainson 203925B jack would be part # DL22560. According to Dutton-Lainson, the jack would indeed be compatible with your existing mounting plate.
I've linked to a product demonstration video featuring the # DL22560 jack. view full answer...
If your 2007 Chevy Silverado Classic 1500 is a light duty (LD) and not a heavy duty (HD) AND you have Westin Ultimate Bull Bar # 32-1175 then the replacement brackets and hardware is # 32-117PK.
Or if you have the Light Duty 1500 and a Westin E-Series Bull Bar # 31-5170 or # 31-5175 then you will need replacement hardware kit # 31-517PK
If your truck is the heavy duty model then for the Ultimate Bull Bar # 32-1245 you will need Replacement Brackets and Hardware Kit for Westin Bull Bar... view full answer...
If you have the Extang BlackMax Soft Tonneau Cover part # EX2940 which is for a 2007 Chevrolet Silverado Classic 1500 6.5' Bed then you need the Replacement Tarp for Extang BlackMax Soft Tonneau Cover part # EX1940. I didn't see where you included the full model or bed size so I went with the most popular option so if this is not correct please just let me know. view full answer...
The correct replacement mounting hardware for a Westin Ultimate Bull Bar that fits your 2007 Chevrolet Silverado 1500 Classic is part # 32-117PK if you have an LD or part # 32-124PK if you have the HD.
Please note the bull bars fit specific vehicles so these kits will only fit and work with the Westin Ultimate Bull Bar that fits your specific vehicle. view full answer...
We do have a large selection of replacement mounting kits available for brush guards that are confirmed to fit your 2007 Chevy Silverado 2500HD. Both the grille guard itself and the mounting brackets they work with are vehicle-specific, meaning in order to find the correct hardware, you will need to determine what model brush guard you have.
For example, if you happen to have the Westin Sportsman Grille Guard # 40-1245, which is confirmed to fit your Silverado, the correct Replacement... view full answer...
We don't have any lights in that specific size. The closest we have are the LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - 16 Diodes - Oval - Clear Lens # STL211RCB that measure 6-7/16" long x 2-5/16" tall x 1-1/2" deep. These install with the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # A70GB which should account for the measurement differences you mentioned.
Other options are the LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - 16 Diodes - Oval... view full answer...
There are E-Series, Platinum, and Signature Series Westin bars for the 2007 Chevy Silverado Classic. You will need to measure for the overall width and length and the center to center distance between the mounting holes on the bars.
If you have the E-Series bars the correct pad is # 23-0001. These pads are 21 inches long, 3 inches wide and have 5 pins with the following distance measurements: 3-5/8 inches from 1st to 2nd, 5-5/8 inches from 2nd to 3rd, 6-3/8 inches from 3rd to 4th, and... view full answer...
There are different Yates 500 rollers available and they typically have different attachment hole diameters. Looking at the pictures you sent in, it looks like you have a cap that feeds through the front of the roller and attaches using a Wobble Roller Retainer Ring # CE10981 to hold that cap onto the shaft.
You just need to remove the retainer pin to pull of the cap to the roller and measure the diameter of the hole. Then you just need to get a roller with the same size hole.
For example... view full answer...
The upper brackets for Firestone Ride-Rite kit # F2550 are the same, # F5766. The one side also has a heat shield but it is a separate part, # F2135821004. view full answer...
We have custom fit gooseneck hitches from Curt that are a confirmed fit for your 2007 Chevy Silverado 2500HD short bed like with the part # C60712 but the # C65500 you referenced is essentially just a plate that could be fabricated to fit nearly all applications but the install will be pretty involved since you'd have to weld to the truck frame etc.
I attached an install video for this for you to check out as well. view full answer...
Based on my research it sounds like you have the Extang Tonneau Cover, part # EX2625, which is a confirmed fit on your 2007 Chevrolet Silverado 1500 short bed. I spoke with my contact at Extang and he said you will want replacement tarp part # EX1625. view full answer...
The Westin Sportsman Grille Guard - 1 Piece - Black Powder Coated Steel # 40-1175 will use mounting hardware # 40-117PK. This if for the 1500 LD. The Westin Sportsman Grille Guard has been discontinued for the 1500HD.
If you have the 2500 or 3500 the Westin Sportsman Grille Guard - 1 Piece - Black Powder Coated Steel # 40-1245 and mounting hardware # 40-124PK.
The brackets only work with the specific grille guards and are both vehicle specific. view full answer...
If you have the Extang Solid Fold or Solid Fold 2.0 Tonneau Cover, it sounds like you are just needing the Replacement Tail Clamp Assembly # EX1035. This includes 1 complete tail clamp assembly and will be a direct replacement for a tail clamp on your tonneau cover.
If you have the Solid Fold cover, you will need to cut an access hole to be able to remove the existing clamp before installing the new one. If you have the Solid Fold 2.0, there is a clamp cover that will be removed. There... view full answer...